IEC 60601-2-18 Medical electrical equipment-Part 2-18: Particular requirements for the basic safety and essential performanceof endoscopic equipment

Scope

This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ENDOSCOPIC EQUIPMENT together with its INTERCONNECTION CONDITIONS and INTERFACE
CONDITIONS.

Object

The object of this particular standard is to establish particular BASIC SAFETY and ESSENTIAL PERFORMANCE requirements for ENDOSCOPIC EQUIPMENT [as defined in 201.3.204].
NOTE This object includes endoscopic intense light source equipment which is part of the ENDOSCOPIC

EQUIPMENT including its supply unit, therefore IEC 60601-2-57 does not apply.

Collateral standards

This particular standard refers to those applicable collateral standards that are listed in Clause 2 of the general standard and Clause 201.2 of this particular standard.
IEC 60601-1-2 applies as modified in Clause 202. IEC 60601-1-3 does not apply. All other published collateral standards in the IEC 60601-1 series apply as published.

Particular standards

In the IEC 60601 series, particular standards may modify, replace or delete requirements contained in the general standard and collateral standards as appropriate for the particular ME EQUIPMENT under consideration, and may add other BASIC SAFETY and ESSENTIAL PERFORMANCE requirements.

A requirement of a particular standard takes priority over the general standard.
For brevity, IEC 60601-1 is referred to in this particular standard as the general standard.
Collateral standards are referred to by their document number.
The numbering of clauses and subclauses of this particular standard corresponds to that of the general standard with the prefix “201”(e.g. 201.1 in this standard addresses the content of Clause 1 of the general standard) or applicable collateral standard with the prefix “20x” where x is the final digit(s) of the collateral standard document number (e.g. 202.4 in this particular standard addresses the content of Clause 4 of the IEC 60601-1-2 collateral standard, 203.4 in this particular standard addresses the content of Clause 4 of the IEC 60601-1-3 collateral standard, etc.). 

LISUN following instruments fully meet IEC 60601-2-18 Medical electrical equipment-Part 2-18: Particular requirements for the basic safety and essential performanceof endoscopic equipment

GDJS-015B Temperature Humidity Chamber | Thermal Chamber

LS9955 Automatic Safety Test System

SG61000-5 Surge Generator

ESD61000-2 ESD Simulator Guns

RFCI61000-6 RF Conducted Immunity Test System

IK01-07 Spring Impact Hammer IK Level Tester IEC 60068-2-75