Sales@Lisungroup.com +8618117273997

English

中文简体

English

Русский

Español

Português

Türkçe

العربية

Deutsch

Polski

Italiano

Français

한국어

ไทย

Tiếng Việt

日本語

Home Standards CIE 121 The photometry and goniophotometry of luminaries

CIE 121 The photometry and goniophotometry of luminaries

Scope

This technical report provides general requirements for the photometry of luminaires of most types and includes the following information:

1. Standard test conditions under which the tests should be carried out, with acceptable practical tolerances.
2. Selection procedures for lamps and luminaires.
3. Procedures for measurement of the photometric characteristics of luminaires and assessment of the possible sources of error.
4. Correction factors and service conversion factors.
5. Presentation of test results.

The report is considered to be sufficiently comprehensive to form a practical guide for industrial laboratories and contains sufficient information to replace publication CIE 24-1973 “Photometry of indoor type luminaires” and CIE 27-1973 “Photometry of luminaires for street lighting”. CIE will publish supplementary reports covering these types of luminaires more specifically.

LISUN following instruments fully meet CIE 121 The photometry and goniophotometry of luminaries:

CIE 121:1996 Clause and Subject	LISUN Model
2.4.4 Illuminance meter	LMS-6000
2.4 Terms related to meauring instrument	LSG-1800A and LSG-1890B
3.2 and 3.3 and 3.4 Basic information about goniophotometer	LSG-1800A and LSG-1890B
4.2.3 Test Ballast	WT5000
4.4.1 Requirement for illumincance meters used in goniophotometer	LSG-1800ACCD and LSG-1890BCCD
5. Preparation of Lamps,Ballasts and Luminaires for Tests	LPCE-2(LMS-9000) and WT-5000 and SY2036
6.3.3, 6.4 Integrating photometer	LPCE-2(LMS-9000）
6.5 Luminance measurements	LMS-6000L